Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nishiyama, Nariaki; Goto, Akira*; Tsukahara, Yuzuko; Kawamura, Makoto; Umeda, Koji*; Niwa, Masakazu
JAEA-Testing 2022-003, 51 Pages, 2022/09
JAEA-Testing-2022-003.pdf:5.24MB
JAEA-Testing-2022-003-appendix(CD-ROM).zip:1.12MB
Advancement of the evaluation technology of the magma activity range is essential as one of the technical issues related to volcanic and igneous activities in the evaluation of the long-term stability of the geological environment in the geological disposal of high-level radioactive waste. As an effective method, topographical analysis of volcanic edifices is expected to be used to determine the distribution area of dikes. In recent years, the development of computer-based topographic analysis technology has made it possible to simply perform a large volume of work that would otherwise be difficult due to the manual handling. This report describes an analysis method for the shape of contour lines that forms volcanic edifices using GIS software.
Yamaguchi, Akinori*; Yokotsuka, Muneyuki*; Furuta, Masayo*; Kubota, Kazuo*; Fujine, Sachio*; Mori, Kenji*; Yoshida, Naoki; Amano, Yuki; Abe, Hitoshi
Nihon Genshiryoku Gakkai Wabun Rombunshi (Internet), 21(4), p.173 - 182, 2022/09
Risk information obtained from probabilistic risk assessment (PRA) can be used to evaluate the effectiveness of measures against severe accidents in nuclear facilities. The PRA methods used for reprocessing facilities are considered immature compared to those for nuclear power plants, and to make the methods mature, reducing the uncertainty of accident scenarios becomes crucial. In this paper, we summarized the results of literature survey on the event progression of evaporation to dryness caused by boiling of high-level liquid waste (HLLW) which is a severe accident in reprocessing facilities and migration behavior of associated radioactive materials. Since one of the important characteristics of Ru is its tendency to form volatile compounds over the course of the event progression, the migration behavior of Ru is categorized into four stages based on temperature. Although no Ru has been released in the waste in the high temperature region, other volatile elements such as Cs could be released. Sufficient experimental data, however, have not been obtained yet. It is, therefore, necessary to further clarify the migration behavior of radioactive materials that predominantly depends on temperature in this region.
Planning and Co-ordination Office, Sector of Nuclear Safety Research and Emergency Preparedness
JAEA-Review 2021-019, 58 Pages, 2021/11
JAEA-Review-2021-019.pdf:2.26MB
In response to the directives of the 4th medium-to-long-term objectives, Japan Atomic Energy Agency will formulate the 4th medium-to-long-term plan and run its operation according to the plan from the fiscal year 2022. Consequently, the Sector of Nuclear Safety Research and Emergency Preparedness has reviewed the strategies of the safety research for contributing to the demand, "the continuous improvement of nuclear safety and the effectiveness of nuclear disaster prevention". It was also discussed how to proceed the safety research over the medium-to-long-term plan period based on the proposed new strategies. From the viewpoint of developing human resources and maintaining research capabilities in the sector, discussion was made on measures to pass on the knowledge and skills of senior and mid-career researchers to young researchers. The main elements of the proposed strategies are: (1) to efficiently and effectively develop both problem-solving research and advanced or leading research, considering the importance and needs on the nuclear safety and corresponding to regulatory trends and introduction of new technologies, (2) to produce research results of high quality for social implementation, including proactive proposal of measures for enhancing rationality of nuclear safety and regulation by utilizing risk information, and (3) to promote development of human resources and maintenance of technological base through challenging new research subjects. This report summarizes results of the discussion on the medium-to-long-term safety research strategies and the research plans based on the proposed strategies.
Sakurai, Yosuke*; Sato, Hirotaka*; Adachi, Nozomu*; Morooka, Satoshi; Todaka, Yoshikazu*; Kamiyama, Takashi*
Applied Sciences (Internet), 11(11), p.5219_1 - 5219_17, 2021/06
Times Cited Count：3 Percentile：41.12(Chemistry, Multidisciplinary)Collaborative Laboratories for Advanced Decommissioning Science; Tokyo Polytechnic University*
JAEA-Review 2020-062, 47 Pages, 2021/01
JAEA-Review-2020-062.pdf:3.43MB
JAEA/CLADS had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project in FY2019. Among the adopted proposals in FY2018, this report summarizes the research results of the "Development of Semantic Survey Map Building System using Semi-autonomous Mobile Robots for Surveying of Disaster Area and Gathering of Information in Nuclear Power Station" conducted in FY2019.
Nishio, Kazuhisa*; Shimizu, Mayuko; Iyatomi, Yosuke; Hama, Katsuhiro
JAEA-Review 2020-013, 59 Pages, 2020/08
JAEA-Review-2020-013.pdf:19.64MB
The Tono Geoscience Center (TGC) of Japan Atomic Energy Agency (JAEA) has been conducting geoscientific study in order to establish a scientific and technological basis for the geological disposal of HLW. Technical information of the result on the geoscientific study conducted at TGC is provided at the annual Information and Opinion Exchange Conference on Geoscientific Study of TGC for exchanging opinions among researchers and engineers from universities, research organizations and private companies. This document compiles the research presentations and posters of the conference in Mizunami on November 20, 2019.
Kimura, Hideo; Takita, Hayato
JAEA-Technology 2020-002, 50 Pages, 2020/05
JAEA-Technology-2020-002.pdf:5.03MB
Japan Atomic Energy Agency is strongly promoting business process re-engineering (BPR) of the entire organization in order to achieve more efficient, centralized and IT-style work. As part of this BPR, we have been studying the introduction of robotic process automation (RPA), which has been making remarkable progress in recent years, in order to further streamline and improve efficiency mainly for administrative work. In order to implement an appropriate RPA, the characteristics of each RPA software were clarified by investigating the functions of major RPA software and developing sample robots. Furthermore, we categorized various tasks that are expected to utilize RPA software and examined the application of RPA software to each business pattern.
Collaborative Laboratories for Advanced Decommissioning Science; Tokyo Polytechnic University*
JAEA-Review 2019-022, 35 Pages, 2020/01
JAEA-Review-2019-022.pdf:2.71MB
CLADS, JAEA, had been conducting the Center of World Intelligence Project for Nuclear Science/Technology and Human Resource Development (hereafter referred to "the Project") in FY2018. The Project aims to contribute to solving problems in nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the Development of Semantic Survey Map Building System Using Semi-autonomous Mobile Robots for Surveying of Disaster Area and Gathering of Information in Nuclear Power Station. The objective of the present study is to research and develop semi-autonomous mobile robot systems (multi-sensor fusion system, semantic simultaneous localization and mapping (SLAM), system for traversable-route learning and safe traversable-route presentation, etc.) that simply, safely, and rapidly make semantic survey maps including multiple information (air dose rate, temperature, obstacles, etc.). The system will be applied to the investigation of the situation inside the building of the nuclear power station where people cannot access at the time of disaster.
Sugita, Yutaka; Kageyama, Takeshi*; Makino, Hitoshi; Shimbo, Hiroshi*; Hane, Koji*; Kobayashi, Yuichi*; Fujisawa, Yasuo*; Makanae, Koji*; Yabuki, Nobuyoshi*
Proceedings of 17th International Conference on Computing in Civil and Building Engineering (ICCCBE 2018) (Internet), 8 Pages, 2018/06
This paper presents status of development of the iSRE (integrated system for repository engineering) as a design supporting system that enables rational designing of a geological disposal repository. The complimentary technique of construction information modeling/management (CIM) has been employed for the development of iSRE. CIM uses a shared three dimensional (3D) model of associated data through common data models. In this paper, as a design support system that conforms to the characteristics of information management about engineering technology represented by repetition of design during the disposal project period, we examined and designed the function of the "iSRE", constructed a prototype, and confirmed the function through a trial simulating actual work in the disposal project. As a result, with respect to the functions of DB and IF of the iSRE, we got a prospect that these functions can be the foundation of information management on engineering technology, and development of the prototype of the iSRE and its test run extracted issues for practical use of such system.
Narukawa, Takafumi; Yamaguchi, Akira*; Jang, S.*; Amaya, Masaki
Journal of Nuclear Materials, 499, p.528 - 538, 2018/02
Times Cited Count：8 Percentile：62.29(Materials Science, Multidisciplinary)Kunii, Katsuhiko; Itabashi, Keizo
JAEA-Review 2016-021, 130 Pages, 2016/10
JAEA-Review-2016-021.pdf:2.2MB
Under the International Atomic Energy Agency (IAEA), the International Nuclear Information System (INIS) Programme commenced in 1970 and ever since INIS has been acting as a database system available worldwide through information networks each time providing bibliographic information then full text documents of literature, technical reports, etc. on peaceful use of nuclear science and technology, thoroughly supported and maintained by INIS Secretariat in Vienna, on the other hand the inputs for INIS are provided by Member States and Organizations in their own boundaries. As for the INIS activity in Japan, while, the Japan Atomic Energy Research Institute (JAERI), then succeeded as the Japan Atomic Energy Agency (JAEA) as of today, the both have been responsible with the INIS activity in Japan as the INIS National Centre for Japan based on the request of the "former" Science and Technology Agency of the Japanese Government, an advisory committee had have a very important role for the INIS activity in Japan by enthusiastically advising the whole related to the activity from advanced and comprehensive viewpoints of expertise. This report describes about it, the Advisory Committee of International Nuclear Information System (INIS) for Japan, successfully been held 34 times from Oct. 1970 to Mar 2005. Included are the history and its records, change of the member and topics of the Advisory Committee, and the minutes.
Sugita, Yutaka; Kawaguchi, Tatsuya; Hatanaka, Koichiro; Shimbo, Hiroshi*; Yamamura, Masato*; Kobayashi, Yuichi*; Fujisawa, Yasuo*; Kobayashi, Ichiro*; Yabuki, Nobuyoshi*
Proceedings of 16th International Conference on Computing in Civil and Building Engineering (ICCCBE 2016) (Internet), p.1173 - 1182, 2016/07
This paper presents status of development of the iSRE (integrated system for repository engineering) as a design supporting system that enables rational designing of a geological disposal repository. The complimentary technique of construction information modeling/management (CIM) has been employed for the development of iSRE. CIM uses a shared three dimensional (3D) model of associated data through common data models. The contents of this paper are the goal of the development, design requirements and required functions, the basic structure of iSRE. The main databases of the iSRE could then be designed with an interface to coordinate with external systems and other databases. Some of the databases and the interfaces were trialed and a data model was then built. A scenario of iSRE operation was also created and the applicability of iSRE using a data model was also examined. Thanks to the use of the existing software, the development process could be conducted while solving problems for realistic test cases. The prospect of the development of the iSRE for geological disposal projects was realized and the iSRE was confirmed as being a useful tool for designing a repository.
Inagaki, Daisuke*; Tsusaka, Kimikazu*; Aoyagi, Kazuhei; Nago, Makito*; Ijiri, Yuji*; Shigehiro, Michiko*
Proceedings of ITA-AITES World Tunnel Congress 2015 (WTC 2015)/41st General Assembly, 10 Pages, 2015/05
Sato, Sohei; Umemoto, Michitaka*; Homma, Toshimitsu
JAERI-Data/Code 2005-009, 114 Pages, 2005/09
JAERI-Data-Code-2005-009.pdf:6.64MB
JAERI has conducted the analytical studies on the PSA, the severe accidents, and the optimization of protective actions. Based on the results of these studies, JAERI is investigating the method for taking urgent protective actions more reasonably. If an accident occurs in a NPP, early protective actions are carried out. To implement these actions more effectively, emergency preparedness and emergency planning are important, and especially prompt evacuation is expected to reduce a large amount of radiation exposures. To examine the effect of early protective measures by using a PSA method, estimation of the parameter uncertainty related in the time for early protective actions is needed. For this purpose, we have developed an analytical method for urgent protective actions, and estimated the movement distance. This report provides a brief description of the method for estimating the movement distance, input data for this analysis, and the result. Moreover, the problem on the method of evacuation distance analysis and usefulness of this method for emergency planning were discussed.
Ueshima, Yutaka
JAERI-Conf 2004-003, 62 Pages, 2004/03
JAERI-Conf-2004-003.pdf:6.14MB
no abstracts in English
Advanced Photon Research Center; Center for Promotion of Computational Science and Engineering
JAERI-Conf 2004-002, 81 Pages, 2004/03
JAERI-Conf-2004-002.pdf:7.77MB
no abstracts in English
Oka, Kiyoshi
Reza Kenkyu, 31(9), p.612 - 617, 2003/09
no abstracts in English
Kobayashi, Tadayoshi; Miyajima, Kazutoshi; Yanagihara, Satoshi
Advanced Robotics, 16(6), p.497 - 500, 2002/09
Times Cited Count：4 Percentile：25.44(Robotics)no abstracts in English
Yanagihara, Satoshi
Dekomisshoningu Giho, (25), p.2 - 11, 2002/03
no abstracts in English
Niita, Koji*; Takada, Hiroshi; Meigo, Shinichiro; Ikeda, Yujiro
Nuclear Instruments and Methods in Physics Research B, 184(3), p.406 - 420, 2001/11
Times Cited Count：79 Percentile：97.7(Instruments & Instrumentation)no abstracts in English
